Advice

Will Pressure Washing Damage Roof Tiles?

A jet washer makes a roof look clean fast. But tile makers warn that high pressure can damage tiles and drive water where it shouldn’t go. Here’s what pressure does to each type of roof, and when controlled pressure is ever suitable.

Pressure washing is the method most people picture when they think of roof cleaning. It’s quick and the before and after look striking. It’s also the method most likely to cause damage if it’s used on the wrong roof or at the wrong setting.

This guide sets out what a major tile maker says, what pressure does to clay, concrete, slate and fibre cement, and the rule we follow ourselves.

The short answer

High-pressure jet washing can damage roof tiles. On clay, slate, old or fragile tiles it’s the wrong tool. On sound, modern concrete tiles, low and controlled pressure can be used with care, after the roof has been checked. Even then it isn’t always needed, because hand removal and a soft wash often do the job.

What tile maker Wienerberger says

Wienerberger makes clay and concrete roof tiles. Its guide on how to clean roof tiles advises against high-pressure jet washers. It says the forceful spray can damage the tile finish and strip colour from concrete tiles. It also warns that pressure can force water into the interlocks and headlaps, the parts of the roof that keep rain out.

If a pressure washer is used, Wienerberger says it should be on low pressure and directed from the apex of the roof downwards, never upwards. It recommends removing moss with a trowel or stiff brush, ideally on a dry day. It also advises avoiding walking on tiles where possible, because hidden hairline cracks can break later in freeze and thaw.

How pressure causes damage

There are four main ways:

  • Surface loss. The face of a tile protects it. Blasting it away leaves a rougher surface that holds water and grows moss faster.
  • Colour loss. Concrete tiles get much of their colour from a surface layer. High pressure can strip it, leaving a patchy roof.
  • Water in the wrong place. Spraying up or across the roof drives water under laps and into interlocks, and can soak the underlay or battens.
  • Movement. Force can lift slates, shift loose tiles and crack old ridge mortar.

There’s also the mess. A jet washer sends moss and slurry across the garden, onto windows and into gutters and drains. GOV.UK pollution prevention guidance says only clean water should go into surface water drains.

Pressure washing by tile type

Every roof is different, but this is how we approach each covering:

Roof coveringPressure washing?WhyWhat we use instead
Clay tiles (plain, peg, handmade or machine-made)NeverDamp clay is prone to delamination, and force can break the surface awayHand scraping and brushing, soft wash biocide, low-pressure steam where suitable
Natural slateNeverSlates are brittle, can be lifted at the edges and water can be driven under themHand removal, gentle washing, soft wash biocide
Fibre cement or artificial slateNeverOlder ones may contain asbestos and need a careful, low-impact approachLow-impact hand work and soft wash, after a check
Old, worn or fragile tiles of any kindNeverA weak surface or fixing can fail under forceHand methods and soft wash
Sound, modern concrete tilesOnly controlled pressure, after a checkRobust, but high pressure can strip the surface colour and drive water into lapsHand removal first; low, controlled pressure from the ridge down only if it’s needed

Our guide to cleaning each tile type goes into more detail.

Clay and slate: why we never use pressure

Wienerberger notes that moss holds moisture and that clay tiles in particular are more prone to delamination, where the surface separates from the body of the tile. Pressure on damp, weathered clay speeds that up. Natural slate is brittle and lies in overlapping courses held by nails or hooks. A jet aimed at the lower edge can lift it. On both, hand removal and gentle methods are the only sensible choice. See our pages on clay tile roofs and slate roofs.

Need it done? Superior Roof Cleaning cleans roofs and clears moss across London and the South East. Call 01342 344 936 or get a fixed quote.

Concrete tiles: when controlled pressure can work

Modern interlocking concrete tiles are robust. Even so, high pressure can strip their colour. Our rule is simple. We check the tiles first. If they’re sound and the moss won’t come away by hand and brush alone, we may use low, controlled pressure, working from the ridge down with the laps, never into them. If the tiles are worn, porous or already losing their surface, we don’t. Read more on concrete tile roofs.

Isn’t low pressure just a gentle jet wash?

Not quite. The difference is in the setting, the direction and the judgement. Controlled pressure means a low setting chosen for the tile, kept well back from the surface and always aimed down the roof with the laps. It follows hand removal; it doesn’t replace it. A jet wash at full power, aimed wherever the moss is, is a different job with different results.

Our rule on pressure

We use the gentlest method that works. Pressure is never our default. We use controlled pressure only on robust tiles, typically modern concrete, and only after checking their condition. We never use it on clay, slate, old or fragile tiles. Most roofs are cleaned by hand, with soft wash or low-pressure steam where they suit. Our methods page compares them.

Signs a roof has been over-washed

If your roof was jet washed in the past, look for these from the ground:

  • patchy colour, with paler areas where the surface has gone;
  • tiles that look rough or pitted;
  • chipped or flaking clay tiles;
  • slipped tiles or slates, or gaps along the ridge;
  • damp patches in the loft after the clean.

Any of these is worth a closer look. We can check the roof and tell you what we find. If a coating is being suggested as a fix, read roof coatings: when they’re worth it first.

Questions to ask before anyone washes your roof

  • Will you use pressure anywhere? If so, on which tiles, and at what setting?
  • Will you work from the ridge down?
  • Will anyone walk on the tiles?
  • How will you stop run-off reaching surface water drains?
  • What will you do if you find damaged tiles?

A careful roof cleaner will answer each one clearly. Call us if you’d like to talk your roof through.

Quick answers

Is pressure washing a roof ever safe?

Only low, controlled pressure on sound, robust tiles such as modern concrete, worked from the ridge down after a check. Never on clay, slate, old or fragile tiles.

Can pressure washing cause leaks?

It can. Spraying across or up the roof can drive water under laps and into interlocks.

Does pressure washing strip colour from tiles?

Wienerberger warns it can strip colour from concrete tiles.

What’s the alternative to jet washing?

Hand scraping and brushing, then a soft wash biocide, and low-pressure steam where it suits the roof.

Related services

More advice

This guide is general information, not professional advice for your roof. Every roof is different, and we’ll confirm what suits yours when we see it.

Want it done properly? Call for a fixed quote.

Call 01342 344 936Get a quote