Advice

Clay Tile Delamination and Frost Damage

Flaking clay tiles are a sign of delamination. Here’s what it is, how damp, frost and moss play a part, and how to clean clay roofs without making it worse.

Clay tiles are some of the most attractive and long-lasting roof coverings, and they are common on older homes across the South East. But they have a weak point. When the surface of a clay tile starts to flake or peel away, that’s known as delamination. Once it starts, the tile is more exposed to damage.

Here’s what causes it, and how to clean clay roofs safely.

What delamination is

Delamination is when the surface layer of a clay tile separates from the body of the tile. You may see flaking, small pieces of tile in the gutters or on the ground, or patches where the face of the tile has come away and the rougher body underneath is showing.

Wienerberger, a roof tile manufacturer, notes that damp makes clay tiles in particular more prone to delamination (Wienerberger, How to clean roof tiles).

How damp and frost play a part

Clay is porous. A tile that stays wet for long periods holds water in its body. In cold weather, that water can freeze and expand, putting stress on the tile. Repeated cycles of freezing and thawing can open up weaknesses over time. Wienerberger also notes that hairline cracks can grow in freeze-thaw weather, which is one reason to avoid walking on tiles.

Anything that keeps a clay tile damp for longer adds to the risk. Shade, poor drainage and moss all do that.

Where moss comes in

Moss holds moisture against the tile. Wienerberger notes that moss keeps tiles damp, which links directly to the delamination risk on clay. Thick moss can also creep under the laps of tiles, holding water where it can’t dry out. Removing heavy moss lets the roof dry more quickly after rain. See does moss damage roof tiles?

Need it done? Superior Roof Cleaning cleans roofs and clears moss across London and the South East. Call 01342 344 936 or get a fixed quote.

Cleaning clay tiles safely

The irony is that rough cleaning can cause the damage you’re trying to prevent. High-pressure water can strip the surface of a clay tile. Hard scraping can chip edges or lift a weakened face. So on clay roofs we:

  • never use a pressure washer;
  • remove moss by hand, working with the tiles and the direction of the laps;
  • use steam at low pressure where it suits the tiles;
  • apply a biocide by soft wash, as the label says, to slow regrowth;
  • leave lichen to weather off after treatment, rather than forcing it.

See our guide to clay tile roofs.

What if tiles are already flaking?

A few tiles with minor surface flaking may carry on for years. Badly delaminated or cracked tiles may need replacing. We’ll tell you what we find, show you photos and quote before doing anything. On older and listed homes, replacement tiles should match the existing ones as closely as possible. See roof repairs and cleaning listed and historic roofs.

Timing and weather

Wienerberger suggests removing moss ideally on a dry day. We avoid frost, heavy rain and high wind for safety and for the tiles’ sake. Most biocides also need a dry spell to work. See the best time of year to clean a roof.

Quick answers

What causes clay tiles to flake?

Delamination, where the surface separates from the tile body. Damp makes clay tiles more prone to it, and freeze-thaw can make it worse.

Can you pressure wash clay tiles?

No. We never pressure wash clay tiles. We use hand removal, low-pressure steam where suitable and biocide.

Do flaking tiles need replacing?

Not always. Minor flaking may be fine for some time; badly damaged tiles may need replacing. We’ll show you what we find.

Related services

More advice

This guide is general information, not professional advice for your roof. Every roof is different, and we’ll confirm what suits yours when we see it.

Want it done properly? Call for a fixed quote.

Call 01342 344 936Get a quote