Superior Roof Cleaning · London and the South East

Roof steam cleaning

Hot water and steam at low pressure to lift dirt and growth from the tiles, used after hand moss removal on roofs where it suits the covering.

  • Dirt and algae left after the moss is scraped off
  • Growth bedded into the tile texture
  • Tiles that can’t take a pressure washer

Roof steam cleaning: call for a fixed quote

What roof steam cleaning involves

Steam cleaning uses hot water and steam at low pressure. That makes it a useful middle ground: it cleans the tile surface more thoroughly than brushing alone, without the force of a pressure washer. Roof tile maker Wienerberger advises against high-pressure jet washers, because they can damage tile finishes, strip colour from concrete tiles and force water into interlocks and headlaps. Steam at low pressure avoids that. It still isn’t the first step. Thick moss is scraped and brushed off by hand before any steam goes on, and we look at the tiles first to make sure steam suits them. On older and historic roofs, hand brushing comes first and steam is used only where it’s suitable. Where you want regrowth slowed afterwards, a biocide can be applied by soft wash once the roof has dried. Our guide to steam cleaning and soft washing compares the two, and our methods sets out which approach suits which tiles.

We cover London and the South East, with 20 years’ experience behind us. We’re fully insured, we’re a Checkatrade member, and every job comes with a written 12-month workmanship guarantee (what it covers).

Problems we put right

  • Dirt and algae left after the moss is scraped off
  • Growth bedded into the tile texture
  • Tiles that can’t take a pressure washer
  • Black streaks and grimy staining
  • A roof that looks patchy after a hand clean

What we work on

  • Concrete tiles
  • Clay tiles
  • Natural slate
  • Ridge and hip tiles
  • Older roofs, where suitable
  • Tile textures and edges
A tiled roof part-way through cleaning, with moss on one side and clean tiles on the other
A tiled roof part-way through cleaning, with moss on one side and clean tiles on the other
A tiled roof half cleared of moss, seen from the gutter line
A tiled roof half cleared of moss, seen from the gutter line

How it works

  1. We look at the roof and the tiles and agree whether steam suits them, along with a fixed quote.
  2. Safe access is set up and the area below is protected, with gullies and drains covered.
  3. Thick moss is removed by hand first, and we clear the gutters of the moss we remove.
  4. The tiles are cleaned with hot water and steam at low pressure, working down the roof.
  5. We control the run-off, clear up and show you the finished roof.

What steam does well

Brushing removes moss, but it can leave a film of dirt and algae in the texture of the tiles, which shows as a patchy finish. Hot water and steam at low pressure lift that film without driving water hard into the laps. The result is a more even finish on the day, which matters if you’re selling or simply want the roof to look cared for. Steam doesn’t replace hand removal, and on its own it doesn’t stop moss coming back. It’s one part of a clean, chosen where it suits the roof.

Where it suits, and where it doesn’t

We look at each roof before choosing steam. Concrete tiles usually take it well. On clay tiles and slate we take more care, because clay can delaminate when it stays damp and slate is brittle. On historic roofs, gentle hand brushing comes first, with steam at low pressure only where it’s suitable. Older fibre cement slates may contain asbestos, so they need a careful, low-impact approach, and we’ll advise you before any work starts. If steam isn’t right for your roof, we’ll say so.

Water and run-off

Steam cleaning uses water, and that water picks up dirt and moss on its way off the roof. GOV.UK guidance explains that surface water drains discharge directly to the environment, so only clean water should go into them. We protect gullies and drains, keep the gutters running to the right drains, and don’t let moss sludge wash into surface water drains.

Why it’s worth doing now

A roof that has only been scraped can look patchy, with dirt and algae left in the texture of the tiles. If you want a more even finish, steam is the gentle way to get it, without the risks a jet washer brings to tile finishes and laps. It’s worth planning before you sell, before any roof work, or once the moss has been removed and you can see what’s underneath. Dry, settled weather suits steam cleaning best, and spring and autumn are popular.

What affects the quote

We don’t publish set prices, because no two roofs or properties are the same. Call 01342 344 936 or use the quote form with a few details and photos, or we’ll come and look, and you’ll have a fixed price before any work starts. The main things that change it are:

  • The size and pitch of the roof, and any extensions or a conservatory below
  • Height and access: ladders, a tower, scaffold or powered access if the roof needs it
  • How much moss, algae and lichen there is
  • The tile type and its condition, which decides the method
  • Which method suits the roof: hand removal, soft washing, steam or controlled pressure
  • Whether biocide and gutter clearing are included
  • Parking and where we can set up safely

How our quotes work · Our guide to what affects the cost

What a good quote includes

  • A look at the roof, from the ground, your photos or a visit, before the price is given
  • The method for your tile type, in writing
  • How run-off will be controlled and kept out of surface water drains
  • Which biocide is planned, approved or authorised for use in Great Britain
  • How access will be set up safely
  • Proof of insurance and the written guarantee terms

Afterwards

The roof is left cleaner and more even, with the gutters cleared of the moss we removed and the area below tidy. Steam doesn’t treat spores, so if you added a biocide it will slow regrowth for typically around one to a few years, depending on shade and aspect. Without one, growth will return in its own time. Look at the roof once a year from the ground. The job is covered by a written 12-month workmanship guarantee.

The right method for the surface

We use the gentlest method that works. Moss comes off by hand first; soft washing with biocide and low-pressure steam deal with what’s left. Controlled pressure is used only on robust surfaces after a check, and never on clay, slate, old or fragile tiles. Our methods compares each approach by tile type, and roof types explains how we treat each roof covering.

Run-off and biocides

Surface water drains discharge directly to the environment, so we protect gullies and drains and don’t let moss sludge or biocide wash into them. We only use biocides approved or authorised for this use in Great Britain, as the law requires, and apply them as the label says.

20 years’ experienceRoof cleaning and moss removal
Fully insuredWork at height planned for every roof
Checkatrade memberCheck us before you book
Written guarantee12 months on our workmanship
The gentlest method that worksNo jet washing clay, slate or old tiles

Roof steam cleaning: common questions

Is steam cleaning safe for older tiles?

It works at low pressure, which makes it far gentler than a jet washer. We still look at the roof first. On historic roofs, hand brushing comes first and steam is used only where it’s suitable.

Do you still remove moss by hand?

Yes. Thick moss is always scraped and brushed off by hand first. Steam then cleans the tile surface.

Will steam stop the moss coming back?

No. Steam cleans, but it doesn’t treat spores. If you want regrowth slowed, a biocide can be applied by soft wash once the roof is dry. That typically lasts around one to a few years, depending on shade and aspect.

Is steam better than soft washing?

They do different jobs. Steam cleans the surface on the day, and soft washing treats remaining spores and slows regrowth. Many roofs benefit from both, and we’ll suggest what suits yours.

Can you steam clean a slate roof?

Sometimes, with care. Slate is brittle and can be lifted by pressure, so we look at its condition first and keep foot traffic to a minimum. If steam isn’t right, we’ll recommend a gentler approach.

How much does roof steam cleaning cost?

We don’t publish prices. The size and pitch of the roof, height and access, how much moss there is, the tile type and condition, and whether biocide and gutter clearing are included all affect it. Call for a fixed quote and you’ll have a fixed price before we start.

Do you give a fixed price before you start?

Yes. Call us or use the quote form with a few details and photos, or we’ll come and look, and you’ll have a fixed price before any work starts.

Are you insured, and is the work guaranteed?

Yes. We’re fully insured, we’re a Checkatrade member, and every job comes with a written 12-month workmanship guarantee. It covers the work we did; it isn’t a promise that moss won’t grow back.

More questions and answers

Page updated 30 October 2026

Call 01342 344 936Get a quote