The single most useful thing to know before anyone cleans your roof is what it’s made of. A method that’s fine on modern concrete tiles can harm clay or slate. And some older roofs need a careful, low-impact approach for reasons that have nothing to do with moss.
This guide covers the four main roof coverings across London and the South East, plus historic and listed roofs, and explains how we approach each one.
How to tell what’s on your roof
- Clay plain tiles are small, flat or slightly curved, laid in many overlapping courses. They’re usually red, orange or brown, often weathered and uneven.
- Concrete interlocking tiles are larger, often with a profile or wave, and sit in neat rows. They’re grey, brown, red or dark, and common on post-war and modern homes.
- Natural slate is thin, grey or blue-grey and slightly uneven, with a natural texture.
- Fibre cement or artificial slate looks like slate but is very even in thickness, size and colour.
If you’re not sure, a photo from the ground is usually enough for us to tell you. Our roof types guide has more.
A quick comparison
| Roof covering | Pressure washing? | Why | What we use instead |
|---|---|---|---|
| Clay tiles (plain, peg, handmade or machine-made) | Never | Damp clay is prone to delamination, and force can break the surface away | Hand scraping and brushing, soft wash biocide, low-pressure steam where suitable |
| Natural slate | Never | Slates are brittle, can be lifted at the edges and water can be driven under them | Hand removal, gentle washing, soft wash biocide |
| Fibre cement or artificial slate | Never | Older ones may contain asbestos and need a careful, low-impact approach | Low-impact hand work and soft wash, after a check |
| Old, worn or fragile tiles of any kind | Never | A weak surface or fixing can fail under force | Hand methods and soft wash |
| Sound, modern concrete tiles | Only controlled pressure, after a check | Robust, but high pressure can strip the surface colour and drive water into laps | Hand removal first; low, controlled pressure from the ridge down only if it’s needed |
Hand removal of the moss comes first on every roof. The table is about what happens next.
Clay tile roofs
Clay tiles are common on older homes across the South East. They can last a very long time, but they don’t like staying wet. Wienerberger’s roof tile guide notes that moss holds moisture, and that clay tiles in particular are more prone to delamination, where the surface separates from the body of the tile.
So the aim on clay is to get the moss off gently and let the roof dry out. We remove it by hand with scrapers and brushes, then use a soft wash biocide and, where suitable, low-pressure steam. We never pressure wash clay. Tiles that are already flaking are noted, and we’ll show you what we find. See clay tile roofs and clay tile delamination.
Concrete tile roofs
Interlocking concrete tiles are the most robust covering we clean. They’re also the most often jet washed, and that has a cost. Wienerberger warns that high-pressure jet washers can strip colour from concrete tiles and force water into interlocks and headlaps. Moss in the interlocks can block the channels that carry water down the roof.
We start with hand removal, clearing the interlocks carefully. If the tiles are sound and growth is stubborn, we may use low, controlled pressure, working from the ridge down, after checking their condition. Worn or porous concrete tiles get the gentle treatment instead. A soft wash biocide finishes the job if agreed. See concrete tile roofs.
Need it done? Superior Roof Cleaning cleans roofs and clears moss across London and the South East. Call 01342 344 936 or get a fixed quote.
Natural slate roofs
Slate sheds water well and grows less moss than many tiles. But it’s brittle, and it’s hung in thin, overlapping courses. Pressure aimed at the lower edges can lift slates, and walking on them can crack them. Moss tends to collect in the laps and along the ridge.
We clean slate by hand, with gentle washing and a soft wash biocide where needed. We don’t pressure wash slate. Slipped or cracked slates are common on older roofs, and a clean is a good time to spot them. We’ll show you what we find and quote before any repairs. See slate roofs.
Fibre cement and artificial slate
Fibre cement slates are light, even and widely used. They grow moss and lichen readily, and their surface can be softer than natural slate. Older fibre cement slates may contain asbestos, so they need a careful, low-impact approach. That means no pressure washing and no aggressive scraping.
We check the roof first and advise on the approach. Usually it’s gentle hand removal and a soft wash biocide. We don’t test for or remove asbestos. If you’re unsure what your slates contain, get advice from a specialist first. See fibre cement roofs.
Historic and listed roofs
Old roofs often use handmade clay tiles, stone or slate, with lime mortar at the ridge. They’re usually more fragile than they look. The Society for the Protection of Ancient Buildings suggests in its roof maintenance guidance that a seasonal brushing down helps control moss, which suits these roofs well.
We use the gentlest methods: hand brushing, a soft wash biocide where suitable and low-pressure steam where it suits. We don’t recommend coatings on historic roofs without the council’s advice. For a listed building, Historic England explains that listed building consent is needed for works that would affect its special character, and suggests checking with the council’s conservation officer. See historic and listed roofs.
What every roof has in common
- Safe access. HSE says all roofs should be treated as fragile until a competent person has confirmed they are not.
- Protection below. Paths, plants, cars and conservatories are covered or moved.
- Run-off control. Moss sludge and biocide must stay out of surface water drains, as GOV.UK guidance sets out.
- Gutters cleared. We clear the gutters of the moss we remove.
- Honest limits. Biocide slows regrowth for typically around one to a few years, depending on shade and aspect. It isn’t permanent.
Mixed roofs and extensions
Many homes have more than one covering. A clay main roof may sit beside a concrete-tiled extension, a slate bay or a glass conservatory roof. Each part is cleaned to suit what it is. That’s one reason a quote should name the method for each part of the roof, not just say “roof clean”. If you’d like us to look at yours, call for a fixed quote.
Quick answers
Can you pressure wash clay roof tiles?
No. Damp clay tiles are prone to delamination, and pressure can break the surface away. We use hand methods, soft wash and low-pressure steam.
Can concrete roof tiles be pressure washed?
Only with low, controlled pressure on sound tiles, from the ridge down, after a check. High pressure can strip their colour.
How do you clean a slate roof?
By hand, with gentle washing and a soft wash biocide. Pressure can lift slates, so we don’t use it.
Do fibre cement slates contain asbestos?
Older ones may. They need a careful, low-impact approach, with no pressure washing or aggressive scraping.
Related services
More advice
- Will Pressure Washing Damage Roof Tiles?
- Clay Tile Delamination and Frost Damage
- Concrete Roof Tiles: Cleaning Without Losing Colour
- How to Clean a Slate Roof Safely
- Cleaning Listed and Historic Roofs
- All advice
This guide is general information, not professional advice for your roof. Every roof is different, and we’ll confirm what suits yours when we see it.