Superior Roof Cleaning · London and the South East
Cleaning fibre cement and artificial slate roofs
Fibre cement slates need a careful, low-impact approach, especially older ones. We look at the roof first, never pressure wash it and never scrape aggressively.
- We check the roof before agreeing a method
- Soft wash biocide at low pressure
- No pressure washing, no aggressive scraping
Cleaning fibre cement and artificial slate roofs: call for a fixed quote
How to recognise fibre cement slates
Fibre cement slates, often called artificial or man-made slates, are made from cement reinforced with fibres. From the ground they can look like natural slate, but they are thinner and perfectly even, with crisp, regular edges and a flat, uniform colour, usually grey, blue-black or sometimes reddish. Over time the surface coating weathers and they can look dull or patchy. Some have a slightly textured face. They were widely used on homes in the later 20th century and are still made today.
Fibre cement is also used for corrugated sheet roofs on garages and outbuildings. Those roofs are fragile and need particular care.
The asbestos question
Older fibre cement slates and sheets, typically those put on before 2000, may contain asbestos. That is why older fibre cement roofs should never be scraped hard or pressure washed. They need a careful, low-impact approach.
We don’t test for asbestos and we don’t remove it. If you know or suspect your roof contains asbestos, tell us when you ask for a quote. We’ll look at the roof and advise whether a gentle clean is suitable, or whether you should have it checked first by a specialist. HSE has guidance on asbestos for anyone who owns or works on older buildings.
What moss does to fibre cement
Fibre cement slates have a fairly porous surface once their coating has weathered, and moss, algae and lichen take hold readily, especially on shaded and north-facing slopes. As on any roof, moss holds moisture, packs into the laps, lifts in clumps and gets washed into the gutters and downpipes, where it can block them. Moss on the ridge can crack the mortar (Wienerberger: how to clean roof tiles).
How we clean fibre cement roofs
- A look first. We check the age and condition of the slates before agreeing a method.
- Soft wash biocide. The main method: a biocide approved or authorised for this use in Great Britain, applied at low pressure, kills the moss, algae and lichen and slows regrowth. Growth then loosens and weathers off.
- Gentle, low-impact brushing to lift loose moss, never aggressive scraping.
- Low-pressure steam only after we have looked at the roof and agreed it is suitable.
- Gutters cleared of the moss we remove, and run-off controlled so nothing goes into surface water drains.
We never pressure wash fibre cement slates or sheets.
Fragile roofs and safe access
Fibre cement slates crack easily underfoot, and corrugated fibre cement sheets are a well-known fragile roof. HSE says all roofs should be treated as fragile until a competent person has confirmed they are not (HSE: roof work). We plan access to keep weight off the roof covering, using roof ladders, towers, scaffold or powered access to suit the roof. If you’re thinking of tackling it yourself, please read should you remove roof moss yourself? first.
Coatings on fibre cement
We don’t recommend coating older fibre cement roofs that may contain asbestos, because surface preparation would disturb them. For newer fibre cement, a coating is possible on a sound, clean, dry roof, but it changes the look and needs maintaining. We’ll give you an honest view.
What to tell us when you ask for a quote
A few details help us plan the right approach: roughly when the roof was put on, if you know; whether you have any survey or paperwork that mentions the roof covering; whether there are outbuildings with fibre cement sheet roofs you’d like looked at; and a couple of photos from the ground. With that, we can tell you whether a gentle soft wash clean is suitable and give you a fixed quote.

Roof cleaning near you
Related
Cleaning fibre cement and artificial slate roofs: common questions
Can you pressure wash artificial slates?
No. We never pressure wash fibre cement or artificial slates. We clean them with a soft wash biocide at low pressure and gentle brushing, after checking the roof first.
Do my fibre cement slates contain asbestos?
Older fibre cement slates, typically those put on before 2000, may contain asbestos. We don’t test for it. If you’re unsure, a specialist can check, and we’ll advise on whether a gentle clean is suitable.
Do you remove asbestos roofs?
No. We don’t test for or remove asbestos. We only clean fibre cement roofs where a careful, low-impact method is suitable.
How long does it take for the moss to go after a soft wash?
The biocide starts working once it has dried on, and dead moss and lichen loosen and weather off over the following weeks and months, depending on the weather.
Page updated 30 October 2026