Superior Roof Cleaning · London and the South East
Cleaning slate roofs
Natural slate lasts for generations but is brittle underfoot. We clean slate roofs from proper access with gentle methods, and never use a pressure washer on them.
- Worked from roof ladders and proper access
- Soft wash biocide for moss, algae and lichen
- Never jet washed
How to recognise a slate roof
Natural slate is thin, flat and split from stone, so each slate has a slightly uneven, layered surface and a natural sheen. Most are dark grey, blue-grey or purple-grey. Slates are laid in neat overlapping courses and fixed with nails or hooks. They are common on Victorian and Edwardian homes and on many older buildings.
Artificial slates look similar from the ground but are perfectly even in thickness and colour, with crisp, regular edges. They are usually fibre cement and need a different approach, explained on our fibre cement roofs page.
What moss and lichen do to slate
Slate itself doesn’t absorb much water, but moss holds damp against it and packs into the laps, where it lifts and slowly works its way under the edges. Moss blown and washed off the roof blocks gutters and downpipes, and moss on the ridge can crack the mortar, a point Wienerberger makes in its guidance on how to clean roof tiles. The Society for the Protection of Ancient Buildings (SPAB) adds that acidic rainwater running off moss can corrode some metals below, such as gutters (SPAB: roof maintenance).
Lichen is very common on slate. It is slow-growing and clings hard, and trying to scrape it off can damage the surface of the slate, so it’s usually treated with biocide and left to weather off.
Why slate needs a gentle hand
Slate is brittle. It cracks when walked on, and slates held by old nails or hooks can slip. A pressure washer can lift slates, break their edges and drive water up under the laps. So we never jet wash slate, and we keep off the slates themselves, working from roof ladders, towers, scaffold or powered access to suit the roof.
HSE says all roofs should be treated as fragile until a competent person has confirmed they are not (HSE: roof work), and on slate that advice is especially sound. Our article on how to clean a slate roof safely explains more.
How we clean slate roofs
- Hand moss removal. Moss is carefully scraped and brushed off by hand from proper access, then bagged and taken away.
- Soft wash biocide. A biocide approved or authorised for this use in Great Britain is applied at low pressure to kill moss, algae and lichen and slow regrowth.
- Low-pressure steam, with care, where the slates are sound and it will help.
- Gutters cleared of the moss we remove, and run-off controlled so nothing goes into surface water drains.
Slipped slates and coatings
Older slate roofs often have a few slipped, cracked or missing slates. We’ll show you what we find and quote for repairs before doing anything.
We don’t usually recommend coating natural slate. It changes the look of the roof, slate roofs need to stay breathable, and many slate roofs are on older homes in conservation areas or on listed buildings, where you should check with the council before changing the roof’s appearance.
Keeping a slate roof in good order
Slate rewards regular, light care. Wienerberger suggests checking a roof every year and accessing it for maintenance every three to five years, or more often if it’s heavily shaded or often damp (Wienerberger: how to clean roof tiles). From the ground, look for green or yellow patches spreading across the slates, moss building up along the laps and ridge, slates that have slipped out of line, and gutters that overflow in heavy rain. Catching moss before it gets thick means a quicker, gentler clean and less risk to the slates.
Our articles on moss, lichen and algae and how often a roof should be cleaned explain what to look for.

Roof cleaning near you
Related
Cleaning slate roofs: common questions
Can you jet wash a slate roof?
We don’t. Pressure can lift and break slates and drive water under the laps. We clean slate by hand from proper access, with a soft wash biocide and low-pressure steam where suitable.
Do you walk on slate roofs?
We avoid it. Slate is brittle and cracks underfoot, so we plan access with roof ladders, towers, scaffold or powered access to suit the roof.
How do you remove lichen from slate?
Usually with a biocide, leaving the lichen to weather off over the following months. Scraping lichen can damage the slate surface.
Can you replace slipped slates?
Yes, slipped, cracked or missing slates found during a clean can be refixed or replaced. We’ll show you what we find and quote first.
Page updated 30 October 2026