Interlocking concrete tiles are on a huge number of post-war and modern homes. They are robust, and they put up with more than clay or slate. That makes them the roof most often jet washed. It also makes them the roof where the side effects of jet washing are easiest to see.
Here’s what happens to the colour, and how we clean concrete tiles instead.
Where the colour sits
A concrete tile has a finished surface that gives the roof its colour and texture when new. Over many years of sun, rain and frost, that surface weathers. That’s normal, and it’s why older concrete roofs often look duller than new ones.
The finish is the part that cleaning touches. Gentle methods work on the growth and dirt sitting on top of it. Aggressive methods can wear away the finish itself, and once it’s gone, cleaning can’t bring it back.
What heavy jet washing does
Wienerberger, a roof tile manufacturer, advises against high-pressure jet washers on roofs. It notes that they can damage tile finishes, strip colour from concrete tiles and force water into interlocks and headlaps (Wienerberger, How to clean roof tiles). If a pressure washer is used, it should be on low pressure, working from the apex down.
The result of too much pressure is often a roof that looks clean but blotchy, with lighter patches where the jet lingered and a rougher surface that can hold dirt and spores more easily. Water forced up under the laps can also end up where it shouldn’t.
How we clean concrete tiles
We use the gentlest method that works, even on robust tiles:
- Hand removal of moss with scrapers and stiff brushes, bagged and taken away.
- Steam at low pressure to lift growth and dirt where it suits the roof.
- Soft wash with biocide to kill remaining spores and slow regrowth, typically for around one to a few years, depending on shade and aspect.
- Controlled pressure only where suitable. On robust concrete tiles in good condition, we may use controlled pressure, but only after checking them, and never as a default.
See our concrete tile roofs page and our methods.
Need it done? Superior Roof Cleaning cleans roofs and clears moss across London and the South East. Call 01342 344 936 or get a fixed quote.
What if the colour has already gone?
If a roof has been heavily jet washed in the past, or has simply weathered for many years, cleaning can’t put the colour back. Some homeowners consider a roof coating at this point. A coating changes how the roof looks, needs a clean, dry, sound roof, and isn’t right for every home. Breathability and future maintenance matter too. Our article on roof coatings gives a balanced view, and our roof coating page explains how we approach it.
Check the interlocks and ridge
Concrete roofs have their own weak spots. Moss in the interlocks can block the water channels, and moss on ridge mortar can crack it, according to Wienerberger. A good clean pays attention to both. See moss on ridge tiles and cracked mortar.
Questions to ask before a clean
Ask how the roof will be cleaned and what pressure, if any, will be used. Ask whether the contractor checks the tiles first. And be wary of anyone who offers to “blast it clean” in an hour. Our checklist for choosing a roof cleaner has more.
Quick answers
Will pressure washing ruin concrete tiles?
High pressure can strip colour and damage the finish. We only use controlled pressure on robust tiles after checking them.
Can cleaning restore faded concrete tiles?
Cleaning removes growth and dirt but can’t replace lost colour. A coating is one option, with pros and cons.
Why does my jet-washed roof look patchy?
Uneven pressure can remove more surface in some places than others, leaving lighter patches.
Related services
More advice
- Will Pressure Washing Damage Roof Tiles?
- Roof Coatings: What They Do and When They’re Worth It
- Clay, Concrete, Slate or Fibre Cement: Cleaning Each
- Moss on Ridge Tiles and Cracked Mortar
- All advice
This guide is general information, not professional advice for your roof. Every roof is different, and we’ll confirm what suits yours when we see it.