Superior Roof Cleaning · London and the South East
Cleaning concrete tile roofs
Concrete tiles are tough, but their coloured surface isn’t. We clean them by hand and with soft wash and steam, and use controlled pressure only on robust tiles after checking them.
- Hand moss removal and soft wash biocide
- Low-pressure steam to lift stubborn growth
- Controlled pressure only after a condition check
How to recognise a concrete tile roof
Concrete tiles are the most common roof covering on post-war and modern homes. They are larger and thicker than clay plain tiles, and most are interlocking: each tile hooks into the next along its sides, so fewer tiles cover the roof. Some are flat, some have a rounded or wavy profile. The colour is usually a surface coating or a layer of fine granules over grey concrete, in browns, reds, greys and greens. Where the surface has worn, you’ll often see the grey concrete showing through at the edges.
What moss does to concrete tiles
Concrete tiles have a slightly rough surface that moss and algae grip easily, and interlocking tiles have water channels along their sides. Wienerberger’s guidance on how to clean roof tiles explains that moss in the interlocks can block those channels, so water can’t drain the way it should. Moss also holds moisture against the tiles, lifts in clumps that block gutters and downpipes, and can crack ridge mortar.
Black streaks and green films are usually algae. Grey, yellow or orange crusty patches are lichen. Both are common on concrete, especially on north-facing and shaded slopes.
The colour problem
The thing that wears out first on a concrete tile is its colour, not its body. Wienerberger warns that high-pressure jet washers can strip colour from concrete tiles, and can force water into the interlocks and headlaps. A roof jet washed too hard can come out patchy and grey, and the weathered surface will hold dirt and moss again more quickly.
That is why we don’t start with pressure. Our article on cleaning concrete tiles without stripping the colour explains more.
How we clean concrete roofs
- Hand moss removal. Moss is scraped and brushed off by hand, including from the interlocks, bagged and taken away.
- Low-pressure steam. Steam lifts algae and ground-in dirt without the force of a jet wash.
- Soft wash biocide. A biocide approved or authorised for this use in Great Britain is applied at low pressure to kill what remains and slow regrowth, typically for around one to a few years depending on shade and aspect.
- Controlled pressure, only where suitable. On robust tiles in good condition, a controlled, low-pressure wash working from the top down can be the right finish. We check the tiles first, and it is never our default. Old, soft or crazed concrete tiles don’t get pressure at all.
We clear the gutters of the moss we remove, protect the area below, and control run-off so moss sludge and biocide don’t go into surface water drains.
Coatings on concrete tiles
Concrete tile roofs are the ones where a roof coating is most often considered, after a thorough clean. It can refresh a faded roof, but it changes the look, it needs a clean, dry and sound roof, and breathability and future maintenance matter. In a conservation area, check with the council first. We’ll tell you honestly whether we think it’s worth it for your roof.
Repairs we may find
Cleaning often shows up cracked or slipped tiles and loose ridge or hip tiles. We’ll show you what we find and quote for repairs before doing anything.
Keeping a concrete roof in good order
Moss tends to come back first on north-facing slopes and under trees, because those parts of the roof stay wet longest. Keep an eye on the interlocks and the ridge from the ground, and on gutters that overflow in heavy rain, which often means moss has washed down into them. A light clean before the moss gets thick is quicker and gentler than a heavy one later. Our articles on north-facing roofs and how often to clean a roof explain more.

Roof cleaning near you
Related
Cleaning concrete tile roofs: common questions
Can you pressure wash a concrete tile roof?
Sometimes, but only on robust tiles in good condition, after we’ve checked them, and with controlled low pressure. It’s never our default. Most concrete roofs are cleaned by hand, with steam and a soft wash biocide.
Will cleaning fade my concrete tiles?
Not the way we do it. Wienerberger warns that high-pressure jet washing can strip colour from concrete tiles, which is why we use gentle methods first and keep pressure controlled where we use it at all.
Why are there black streaks on my concrete roof?
They are usually algae, which grows on damp, shaded roofs. A soft wash biocide kills it, and the staining fades as it weathers.
Should I have my concrete roof coated after cleaning?
It’s an option for some concrete roofs. It changes the look and needs a sound, dry roof, and in a conservation area you should check with the council first. We’ll give you an honest view.
Page updated 30 October 2026