Advice

Steam Cleaning vs Soft Washing a Roof

Steam cleaning and soft washing are both low-pressure ways to clean a roof. Here’s how they differ, what each is good at, and why they are often used together.

When people move away from jet washing roofs, two methods usually come up: steam cleaning and soft washing. Both are gentler than high pressure. Both have their place. But they work in different ways, and the right choice depends on your roof and what’s growing on it.

Here’s a plain comparison.

What soft washing is

A soft wash is a low-pressure application of a biocide. The product is sprayed gently onto the roof, rather than blasted, and left to work. It kills remaining moss, algae and lichen spores and slows regrowth. The roof isn’t usually rinsed hard afterwards. Instead, dead growth and staining fade as the roof weathers.

We only use biocides approved or authorised for this use in Great Britain, as the law requires, and apply them as the label says. See soft wash roof cleaning and roof biocides and the law.

What steam cleaning is

Steam cleaning uses hot water and steam at low pressure. The heat softens and loosens growth and grime, so it can be lifted from the surface without the force of a jet washer. It gives a visible clean on the day, and it uses a modest amount of water. See roof steam cleaning.

How they compare

  • Result on the day. Steam gives a more immediate visual change. A soft wash often looks better in the weeks after, as staining fades.
  • Regrowth. A soft wash leaves biocide on the roof to slow regrowth, typically for around one to a few years, depending on shade and aspect. Steam on its own doesn’t leave a treatment behind.
  • Lichen. Both are gentle. Lichen often needs biocide and time to weather off, rather than being forced off.
  • Weather. Biocide needs a dry spell to work, so soft washing depends more on the forecast.
  • Delicate roofs. Both are low pressure. Steam at low pressure can suit some historic roofs where we want a gentle clean without heavy chemistry.

Need it done? Superior Roof Cleaning cleans roofs and clears moss across London and the South East. Call 01342 344 936 or get a fixed quote.

Why they’re often used together

On many roofs, the best result comes from combining methods. A typical approach is to remove thick moss by hand first, steam where suitable to lift remaining growth and dirt, and then apply a biocide by soft wash to slow regrowth. Each step does what it’s best at.

Neither method replaces hand removal of heavy moss. Thick cushions are best scraped and brushed off, bagged and taken away, so they don’t end up in the drains.

And pressure washing?

Wienerberger, a roof tile manufacturer, advises against high-pressure jet washers on roofs. They can damage tile finishes, strip colour from concrete tiles and force water into interlocks and headlaps (Wienerberger, How to clean roof tiles). We use controlled pressure only on robust tiles, typically modern concrete, after checking their condition, and never on clay, slate, old or fragile tiles. See roof cleaning methods compared.

Which is right for my roof?

It depends on the tiles, their condition, what’s growing and what result you want. We’ll look at the roof first, explain what we recommend and why, and give you a fixed quote. Our methods page sets out how we choose.

Quick answers

Is steam cleaning better than soft washing?

Neither is better in every case. Steam gives a quicker visual result; a soft wash leaves biocide to slow regrowth. They often work best together.

Does steam kill moss?

Steam lifts and loosens growth. A biocide treatment is what slows regrowth afterwards.

Is soft washing safe for clay tiles?

It’s low pressure, so it suits clay tiles when used with hand removal and a suitable biocide applied as the label says.

Related services

More advice

This guide is general information, not professional advice for your roof. Every roof is different, and we’ll confirm what suits yours when we see it.

Want it done properly? Call for a fixed quote.

Call 01342 344 936Get a quote