Kent · Roof steam cleaning
Roof steam cleaning in Millbank, Kent
Roof steam cleaning in Millbank, done the careful way. Safe access planned for the job, the area protected and the waste taken away.
- Delicate tiles that need a gentle method, not force
- Stained areas around the chimney stack
- Algae streaks down the roof
How we handle roof steam cleaning in Millbank
Steam cleaning takes longer than a quick wash. Low pressure means steady, careful passes and that patience is what protects the tiles. Expect it to take a day or more for many roofs, as steam is careful, steady work, depending on the roof. If you are dealing with regrowth since a previous clean and growth gathered in the valleys, we can put it right, from clay tiles, older roofs, where suitable and natural slate onwards.
Long drives, lanes and big gardens are part of working in a village like Millbank, so tell us about the route and where we can park when you book. Trees around rural homes often mean more shade, more moss and more leaves in the gutters.
We have 20 years’ experience in this work, and we stand behind what we do: a written 12-month workmanship guarantee comes with every job. We are fully insured and members of Checkatrade.
- Where
- Millbank (CT3)
- Wider area
- Kent
- Guarantee
- Written 12-month workmanship guarantee
- Price
- Fixed price, set before we begin
- Experience
- Checkatrade member, fully insured
- Phone
- 01342 344 936
- Page updated
- 30 October 2026

When something else is needed
Some problems need a different service or another trade:
- Faded tiles
- Keeping new spores away
- Problems under the tiles
If in doubt, send details through the quote form, or phone us on 01342 344 936 and we’ll say what we think before booking.
Surfaces we cover
- Concrete tiles
- Older roofs, where suitable
- Clay tiles
- Natural slate
- Ridge and hip tiles
- Tile textures and edges
Signs you need roof steam cleaning in Millbank
On slow-drying slopes, growth works into the texture of the tile. Spores lodge in the rough surface and grow there, which makes them hard to brush out.
It’s time to think about roof steam cleaning if you see:
- Moss returning after an old clean
- Growth that brushing alone won’t lift
- Algae streaks down the roof
- A roof that looks tired from the street
If you live near Church of the Holy Cross, or on any of the older streets in Millbank, your roof may be clay or slate, which is cleaned gently by hand.
What to look for in a quote
- What access equipment they’ll use, if any
- Whether the figure could change on the day
- How they’ll handle anything unexpected
- What happens to the moss and debris
Also near Millbank
What else we do in Millbank
FAQs for Millbank
Do you work in villages like Millbank?
Yes, smaller places are covered as well as towns. Directions and a note about parking help us plan the day.
My home in Millbank is near trees: does that matter?
Usually, yes. The nearest ancient woodland to Millbank is Beacon Wood, roughly 0.4 miles south-west of Millbank. Shade keeps a roof damp, and moss grows best on damp, shaded slopes, so roofs under trees may need cleaning more frequently.
My home is listed. Can you help?
Yes. We use the gentlest methods on historic roofs and walls, like hand brushing and low-pressure steam where suitable. A coating, or anything else that changes the look, needs a word with the council first, because listed building consent can be needed for works affecting its special character.
How do you deal with run-off from steam cleaning?
It’s controlled. Gullies and drain outlets are protected, and moss sludge isn’t allowed into surface water drains, which discharge directly to the environment.
Is it safe to do it myself?
Ground-level jobs, yes; roof work, no. Keeping an eye on the roof and gutters and sweeping up fallen moss is sensible, but please do not walk on tiles or use a jet washer on a roof.
Will you need scaffold or a tower?
Only where the job calls for it. Every roof is treated as fragile until it’s confirmed otherwise, so access is planned before work begins, in line with the Work at Height Regulations 2005.
Do you belong to any trade schemes?
Yes. We are a Checkatrade member, and we carry full insurance.
How much does roof steam cleaning cost?
We don’t publish prices, because the cost depends on the job: the size of the area, the height and access, how much build-up there is and the method. We fix the price before we start.
How the job works
At the end, you can look over the work with us if you are in. Anything we noticed, such as a slipped tile or a blocked downpipe, is pointed out there and then. On site, the work takes as long as the roof needs, from a day for a small roof to several for a large or heavily stained one. Plants, borders and anything below the work are protected before any work starts.
- We check the tiles, the growth and the access.
- We plan and set up access.
- Gullies and drain outlets are protected before steaming starts.
- We steam the roof section by section.
- Run-off is controlled and the site cleaned down.
Preparing for the work
- Let us know where we can park
- Clear pots, furniture and washing lines from the area
- Leave side gates unlocked so we can reach the back
Pricing your job
Quoting starts with seeing what’s involved, either from photos you send or a visit to the property. After that, you get a fixed price before any work is booked.
Advice
Let and managed properties
Tenants need to know when we are due, so they can move cars and keep pets indoors. The date can be agreed with you or with the tenant, whichever works best.
When you cannot be there yourself, we let you know when the work is done and flag anything that needs attention, such as a slipped tile or a downpipe that isn’t running. Any repair is quoted separately and only done with your agreement.
Keeping it in good shape
Looking after it afterwards is straightforward, and it makes the next visit easier:
- Look at the roof once a year
- Clear leaves from the gutters each autumn
- Report slipped tiles early
- Consider a soft wash after steaming
When the steam clean is finished, the roof is clear of the growth and grime we set out to remove. Moss and debris washed into the gutters are cleared out and we take the waste with us.
Adding a soft wash biocide after a steam clean keeps the roof clearer for longer. It won’t last forever, typically working for around one to a few years, depending on shade and aspect.
Doing it yourself: an honest view
There are still useful things you can do from the ground: look the roof over once a year, watch for overflowing gutters and sweep up moss that falls onto paths. Anything higher than that is best left to us.
Shop-bought moss treatments are an option for some surfaces, but check the product is authorised for that use and follow the label exactly. On a roof, applying it carries the same height risks as any roof work, and run-off still has to be kept out of drains.
How the job changes from site to site
Natural slate
Access is planned so we are not walking on the slates. A cracked slate is easily caused so we choose access carefully.
Clay tiles
Old clay tiles can be fragile and soft. We keep weight off them, and steam only where it will not do harm.
Millbank roofs and what affects them
At about 3 miles from the coast, Millbank is close enough for sea air to matter. Damp, salty air can suit lichen and algae on roofs, and lichen clings hard, so it’s usually treated with biocide and left to weather off rather than scraped. Ancient woodland is a feature around Millbank: about 16 areas lie within two miles, the closest being Beacon Wood, about 0.4 miles south-west of Millbank. If your roof is shaded by trees, it will stay damp for longer and moss will usually come back sooner than on an open roof. With central London about 55 miles off, Millbank is one of the many South East places on our list for roof steam cleaning. With 20 years’ experience, we are fully insured and a Checkatrade member.
Traffic for Hoath Primary School can make the road outside hard to use at certain times of day. If that’s your street, mention it, and the ladders can go up before the road fills. Living near Curtis Wood, 1.6 miles west of Millbank, can mean more trees, shade and leaf fall. Leaves on the tiles and in the gutters hold damp, and moss thrives on damp.
Millbank is about 2 miles south-east of Herne Bay, in Kent. From the centre of Millbank to the outskirts, we cover roof steam cleaning for every kind of home, from bungalows to large family homes. Our area takes in 922 places across Kent, large and small. Our Maidstone page covers homes nearby (28 miles or so).
All of CT3 is within our area for roof steam cleaning, from the main roads to the quietest streets. Nearby, we also carry out roof steam cleaning in Maypole (1 mile south), Old Tree (1 mile south-east), Highstead (1 mile north-east), Hoath (1 mile south) and Knave's Ash (1 mile south-west). Within a short drive, we also cover Canterbury (6 miles south-west), Margate (10 miles east), Dover (15 miles south), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Local landmarks in Millbank
Roofs on the roads around Spires Academy, Curtis Wood and The Huntsman And Horn Public House are all part of the area we cover. The nearest railway station is Herne Bay station, about 2.4 miles north-west. The countryside around Millbank includes West Blean and Thornden Woods.