Hampshire · Roof coating and sealing
Blashford roof coating
Careful roof coating for Blashford: a fixed quote first, then the work, done gently, and a full clear-up. Call for a fixed quote.
- Uncertainty over coating clay or slate
- Porous tiles that stay damp after rain
- Not sure what a coating means for future maintenance
What’s safe to do yourself
Some jobs are fine to do yourself, from the ground: check the roof from the garden each year, keep paths and gullies clear of fallen moss and watch how the gutters cope in heavy rain. Anything at height is best left to a professional.
Solar panels need particular care. Follow the panel maker’s care guidance, and pressure washers and strong chemicals are best avoided. Most panels sit on a roof, so the same height warnings apply.
How we handle roof coating in Blashford
Some roofs are far better left uncoated. With clay tiles and natural slate, how the roof breathes and how it looks both matter, so we think hard before suggesting it. On a listed building or in a conservation area, the council should be asked first, because a coating changes the roof’s appearance. We’re often asked to deal with porous tiles that stay damp after rain and signs of wear on a roof that was coated before, on concrete interlocking tiles, roofs cleaned and fully dried and extension roofs.
Some homes in villages like Blashford are listed or in a conservation area, which makes gentle cleaning even more important. Cleaning does not change how a roof looks, but a coating or a change of tiles can, so check with the council before anything like that.
Should you have a question about the work after we’ve left, get in touch with us. Your written 12-month workmanship guarantee covers the work we did, and it spells out what it covers.
- Location
- Blashford (BH24)
- Region
- Hampshire
- Cover
- A written 12-month guarantee on our workmanship
- Price
- One fixed price, quoted in advance
- Track record
- Two decades in the trade, fully insured
- Phone
- 01342 344 936
- Reviewed
- 30 October 2026

More services for Blashford
Roof coating around Blashford: what to know
The nearest ancient woodland to Blashford is Home Wood, some 1.7 miles north-west of Blashford. If your roof is shaded by trees, it will stay damp for longer and moss will typically come back sooner than on an open roof. One of the historic houses in the area is Avon Tyrrell House, some 4.7 miles south-east of Blashford. Old roofs like those last because they’re maintained, and gentle cleaning is part of that.
Streets near a church such as Church of St Mary and All Saints often include older homes, and older clay or slate roofs need hand cleaning rather than pressure. Around Linbrook Lake, less than half a mile from the centre of Blashford, gardens often border trees and hedges, and that brings shade. A roof that sits in shade for part of the day tends to grow moss sooner.
Blashford is in Hampshire. Homes in Blashford get the same service as everywhere we cover: a look at the job first, a fixed quote, the gentlest method that does the job and a 12-month workmanship guarantee in writing. Blashford is one of 683 towns, villages and districts in Hampshire where we work for homeowners and landlords. We also work in Reading, around 53 miles away.
Here we cover the BH24 postcode area for roof coating. We cover properties on Snails Lane, Ivy Lane and Woolmer Lane and nearby roads. If your home is just outside Blashford, we cover Ellingham (1 mile north-west), Rockford (1 mile north-east), Poulner (1 mile south-east), Highwood (1 mile east) and Ringwood (1 mile south). We also work in nearby towns such as Totton (13 miles east), Lymington (13 miles south-east), New Milton (9 miles south-east), Barton on Sea (10 miles south-east), Marchwood (15 miles east) and Ashley (9 miles south-east).
Local landmarks in Blashford
Roofs on the roads around Alice Lisle Inn and Ringwood School Academy are all part of the area we cover. Green spaces nearby include Blashford Lakes and Linbrook Lake.
Different parts, different methods
Concrete tiles
Before any coating, each slope of concrete tiles is checked. Any cracked or broken tiles are dealt with before we go further, so the finish goes onto a roof in good repair.
Listed and historic roofs
Older roofs are best treated gently. Hand cleaning, careful checks and repairs where necessary tend to suit them far better than a coating.
What we’re called out for in Blashford
Roof slopes that get little sun stay damp the longest, so growth comes back faster there. After a second or third clean, some owners want to know what else can be done.
Things you may spot from the ground include:
- Marks left once growth has been cleaned off
- Concerns about breathability and trapped damp
- Signs of wear on a roof that was coated before
- Porous tiles that stay damp after rain
Living close to Poulner Junior School can mean parked cars and crowds at the start and end of the school day. If that’s your road, mention it when you book, and setting up can be planned around the busy times.
What your quote should include
- Who clears up afterwards
- What insurance they carry
- Which treatment they’ll apply, if any
- Whether the quote shows VAT
Keeping it in good shape
Here’s our aftercare advice, short and simple:
- Keep off the roof, whether it’s coated or not
- Keep an eye out for slipped tiles and new growth
- Have the roof cleaned and checked before deciding on a coating
- Have the gutters cleared at least once a year
Keep the gutters clear after a coating, just as before. A coating does not stop leaves and silt landing in them, and a blocked gutter can still overflow.
The best preparation for a coating is a roof kept in good order. Clear moss before it gets thick and have slipped tiles put back quickly.
Step by step
Protection comes first: gullies and drain covers are protected, and anything nearby is covered or moved out of the way. After that, we get on with the roof coating. It takes a few days from start to finish, with the clean and the drying time built in, with a full clear-up at the end. Let us know about gates, steps and slopes on the way to the work.
- We check the tile type and condition before talking about coatings.
- The price is fixed and lists each stage of the job.
- Paths, plants, windows and drains are protected before cleaning starts.
- Moss comes off the tiles and out of the gutters.
- When the tiles are clean, dry and sound, the coating is applied and the site cleared.
Before we arrive
- Take in any washing and move pots out of the way
- Make space on the drive by moving cars
- Mention a conservatory or flat roof underneath
Your fixed quote
Photos are often the quickest route to a quote: a wide shot of the whole area, a closer one of the worst part and one showing how we’d get to it. There’s no need to climb anything; the garden or an upstairs window is fine.
Advice
Questions from Blashford
We have trees close to the house in Blashford. Does that matter?
Usually, yes. Home Wood, an ancient wood, is roughly 1.7 miles north-west of Blashford. Shade keeps a roof damp, and moss grows best on damp, shaded slopes, so roofs under trees may need cleaning more frequently.
Is Blashford within the area you cover?
Yes. Small places get the same service as large ones, and Blashford is on our list. Directions and a note about parking help us plan the day.
How long does the job take?
That depends on how much there is to do, but for a typical property it takes two stages: the clean first, then the coating once the roof is dry. We will give you a better idea when we quote.
What about my neighbours?
Any access over a neighbour’s land needs their permission, so please ask them in advance. Otherwise, we keep to your side and protect anything close by.
What weather does a roof coating need?
Dry tiles and a settled spell are essential. Damp or frosty conditions can affect how it bonds, so the forecast decides the date. Late spring through to early autumn often gives the best chances but every year is different.
Will my insurer care about maintenance?
Many home insurance policies exclude gradual damage and wear and tear, so regular maintenance matters. Your policy wording is what counts, so check it or ask your insurer.
How do you decide on the method?
We use the gentlest method that does the job. That might be hand scraping and brushing, a low-pressure soft wash with biocide, steam, or controlled pressure on robust surfaces, chosen after we’ve looked at the surface.
Do I have to be at home?
It depends on the job. Most outside work can be done without anyone home, as long as we can reach it. We’ll talk it through when we book, including access, parking and pets.
Landlords, letting agents and property managers
The tenancy agreement or lease normally says who is responsible for the outside. We are happy to deal with either side, and we’ll tell whoever books us what we found.
If you manage properties from a distance, we will tell you how the job went and point out anything that needs looking at, such as a slipped tile or a downpipe that is not running. Nothing extra is done without your say-so.
What happens if it’s left?
Rushing a coating in poor weather is a mistake. Damp tiles, frost or rain can stop it bonding as it should, and we’d rather wait for the right weather than rush. On older homes, original tiles, render and paving can be hard to match, so caring for what’s there makes sense.
Leaving it longer rarely makes the job smaller. Growth, debris and minor damage tend to build over time, which can mean more work next time. If you’re unsure, get in touch by phone on 01342 344 936, or use the quote form and we will give you a straight view and a fixed quote.
Why us?
- Biocides approved or authorised for this use in Great Britain, as the law requires
- We choose the gentlest method that does the job
- A fixed price, not an estimate
- We’re fully insured