Hampshire · Render and wall cleaning
Poulner render cleaning
Render cleaning in Poulner from a team with 20 years’ experience. Fully insured, with a written 12-month workmanship guarantee.
- A dull, tired look to the whole house
- Moss on brick and stone walls
- A green tide line along the bottom of the walls
Render cleaning in Poulner
Some growth disappears as we work and some fades over the following weeks. Lighter algae often clears quickly, while stubborn black marks and lichen can take a few weeks of weather to fade. We explain what to expect before work begins. Common call-outs are for black lines running down the walls and lichen spots on render, across masonry walls, rendered gable ends and older renders.
Trees, hedges and open fields around a place like Poulner mean shaded walls stay damp for longer. Algae and lichen are treated with a soft wash and biocide, then left to weather.
The guarantee isn’t a handshake. Every job comes with a written 12-month workmanship guarantee, covering the work we carried out. File it with your other house papers for reference.

- Place
- Poulner (BH24)
- Region
- Hampshire
- Cover
- 12-month workmanship guarantee, in writing
- Price
- Fixed quote, agreed before any work
- Experience
- Checkatrade member with 20 years’ experience
- Telephone
- 01342 344 936
- Page updated
- 30 October 2026
When to call us in Poulner
Pebbledash and textured finishes trap dirt and damp in every hollow. Growth gets established in the texture faster than on a smooth wall.
Common reasons people call us are:
- Painted render that’s turned patchy and green
- Lichen spots on render
- Staining around windows and doors
- Black lines running down the walls
Living close to Poulner Infant School can mean parked cars and crowds at the start and end of the school day. Mention it when you book, and the visit can be timed around it.
What to look for in a quote
- Exactly what’s included, area by area
- What happens to the dirty water and sludge
- Whether VAT is included
- Whether the figure could change on the day
Let and managed properties
Empty periods between tenancies or holiday bookings suit outside work well, when access is simple. Let us know the window you are working to and we’ll try to fit around it.
Tenants need to know when we are due, so cars can be moved and pets kept in. We’ll agree the date with you or with them, whichever works best.
Aftercare tips
Once we have finished, these simple steps help:
- Trim plants and climbers back from the walls
- Report cracks or hollow-sounding render to a renderer
- Let a biocide treatment work before rinsing the walls
- Clean the walls before repainting
Once the treatment is on, the biocide keeps working. You may see the walls keep improving for a few weeks as the tougher growth weathers away.
Give the render room to breathe by cutting back plants that touch it. A wall that dries quickly grows less, and growth returns more slowly.
How we price render cleaning
Some jobs are bigger than they look from the street, and some are smaller. The main factors:
- Whether a tower, scaffold or powered access is needed
- Where we can park and unload
- The height and pitch, where the work is above ground
- Whether anything else is added, like clearing the gutters
For work at height, access is a big part of the price. If a tower, scaffold or powered access is needed, it goes into the quote, and we tell you why.
Photos for a quote
When you call or use the quote form, it’s useful to have:
- Any signs of trouble, from cracked tiles to blocked downpipes
- Any side gates, passages or tight spots we’d need to get through
- If the property is listed or historic
- Anything below the work, such as a conservatory, porch or extension
Getting a quote does not take long. Tell us about the job, add a few pictures if you can, and we’ll give you a fixed price. If we need to see it first, we’ll arrange a visit.
Part by part
Brick walls
Older and softer bricks, and the mortar between them, can be damaged by a jet. Low pressure keeps the brick face and the joints intact.
Pebbledash
High pressure can dislodge loose stones from pebbledash so we avoid it. Any bald or loose patches we see are pointed out.
Can I do it myself?
A pressure washer from a hire shop might look like a quick fix for the roof. Roof tile makers’ guidance advises against high-pressure washing, because they can damage tile finishes, strip colour from concrete tiles and force water into the laps and interlocks.
Some jobs are fine to do yourself, from the ground: look the roof over once a year, watch for overflowing gutters and sweep up moss that falls onto paths. Anything at height is best left to a professional.
Poulner questions
Which council covers Poulner for listed buildings and conservation areas?
That’s New Forest council. Their conservation or planning staff can confirm the status of your home and what needs consent. Old render on a listed home gets a soft wash only, and a new colour or finish is one to raise with the council.
Is Poulner close to the New Forest?
The New Forest National Park is within about 4 miles of Poulner. Rural render is cleaned with a soft wash rather than pressure.
My home is listed. Can you help?
Yes, with care. We do not use pressure on historic surfaces, and we will not apply a coating without the council’s advice, and we will pick the gentlest method that does the job. If you’re unsure about consent, the council’s conservation officer can advise.
How long does render cleaning take?
Most render cleans take anything from a few hours to a full day, depending on the walls and the access, including protecting the area and clearing up. Stubborn marks can take a few weeks to fade.
Should I do it myself?
It depends on the job and the height. Paving at ground level is a reasonable DIY job, if you keep the run-off out of surface water drains, while roofs, high gutters and solar panels are best left to us.
Will cleaning damage our render?
We use a low-pressure soft wash for exactly that reason. It’s jet washing that tends to cause damage so we keep to gentle methods. Where paint is already flaking, we tell you before any work starts.
Is there anything I need to do beforehand?
Clear access matters most: cars off the drive, side gates open and pots or furniture out of the way. Close windows and roof lights near the work and keep pets in.
What if you find a problem while you are working?
You are told right away. We never add work without asking; repairs are quoted first, at a fixed price. That way, the price you agreed for the original job doesn’t change.
How the job works
Each job follows the same order: cover and protect what’s nearby, get safely to the work, carry out the render cleaning, tidy everything away and take the waste with us. On site, it takes a few hours for a single elevation, longer for a whole house. Let us know where a van can park at your home in Poulner.
- First we check the render type, any paint, and which walls are included.
- We tell you about any cracked or loose render we spot first.
- Plants are covered or wetted down, and windows, doors and gullies protected.
- The growth is treated gently by soft wash, following the label.
- We clear up, keep the run-off out of the drains and explain what happens next.
How to prepare
- Close windows, doors and roof lights near the work
- Move garden furniture, pots and washing away from the work
- Let us know about earlier repairs or treatments
Getting a quote
The price is only part of a proper quote. Ours sets out what we’ll do, the method we will use and how we’ll reach the work, and the price is fixed. For yours, get in touch on 01342 344 936, or through the quote form.
Advice
Towns and villages near Poulner
Other services in Poulner
Render and walls in Poulner: local notes
One conservation area to know about here is the Ringwood conservation area, some 1 mile south-west of the middle of Poulner. A soft wash leaves render looking as it should, while a new colour or finish in a conservation area is one to raise with New Forest council. The area’s older buildings include Avon Tyrrell House, about 3.8 miles south of Poulner. Older walls like those are a reminder that render and stone respond best to gentle cleaning.
If you live on an older street, near St John the Baptist for instance, your render may be old and need a soft wash rather than pressure. Around Linbrook Lake, about 0.8 miles north of Poulner, gardens often border trees and hedges, and that brings shade. Render in the shade dries slowly, and that suits algae.
Poulner is about 1 mile north-east of Ringwood, in Hampshire. We treat render cleaning in Poulner the same as anywhere in Hampshire: carefully, with a fixed price and a written 12-month guarantee on our workmanship. Poulner is one of 683 places in Hampshire we cover for homeowners and landlords. We also work in Reading, around 54 miles away.
All of BH24 is within our area for render cleaning, from the main roads to the quietest streets. Whether your home is on Oak Lane, Link Road and Croft Road or a nearby road, we can take on the work. If your home is just outside Poulner, we cover Ringwood (1 mile south-west), Hightown (1 mile south), Hangersley (1 mile north-east), Blashford (1 mile north-west) and Forest Corner (1 mile east). Larger places within reach include Totton (12 miles east), Lymington (12 miles south-east), New Milton (8 miles south-east), Barton on Sea (9 miles south-east), Marchwood (14 miles east) and Ashley (8 miles south-east).
Landmarks near Poulner
Properties near Ringwood School Academy and White Hart Public House sit inside the area we work in. Green spaces nearby include Linbrook Lake and Blashford Lakes.