Hampshire · Render and wall cleaning
Render Cleaning in Hill Brow
Render and wall cleaning in Hill Brow, with a fixed quote before we start. Fully insured, with a 12-month written guarantee covering our workmanship.
- Painted render that’s turned patchy and green
- Textured render stained green
- A stained front wall that spoils the look of the house
Render cleaning in Hill Brow, done properly
There’s no loud jet blasting the walls. The biocide is applied at low pressure, plants and windows are protected and nothing is washed into the surface water drains. We bring 20 years’ experience of exterior cleaning to it. If you have damp, green render near the ground and render that looks grey and dirty, we can put it right, from garden and boundary walls, older renders and masonry walls onwards.
Older villages often have listed buildings and conservation areas, and if yours is one of them, gentle cleaning is the right approach. Repainting render in a new colour is one to check with the council first.
The guarantee isn’t a handshake. You get a written 12-month workmanship guarantee with each job, covering the work we carried out. File it with your other house papers in case you need it.

- Location
- Hill Brow (GU33)
- Wider area
- Hampshire
- Cover
- 12 months on workmanship, in writing
- Quote
- One fixed price, quoted in advance
- Experience
- 20 years’ experience; Checkatrade member
- Phone
- 01342 344 936
- Reviewed
- 30 October 2026
Signs you need render cleaning in Hill Brow
A wall that sees little direct sun takes longer to dry after rain. Damp, shaded render is exactly where algae and moss settle which is why the shadiest side of a house normally goes green first.
These are the things we see most often:
- Staining around windows and doors
- A green film on the render
- Moss on ledges, copings and sills
- Render that looks grey and dirty
The older roads around Rake Mission Church and churches like it can have painted or lime-rendered fronts, which we treat gently, never with a jet.
Questions to ask before you book
- Whether the figure could change on the day
- How they’ll protect your property and control run-off
- How they’ll clean without damaging the tiles or surface
- Whether any biocide used is authorised in Great Britain for the job
How we price render cleaning
Each job gets its own quote. This is what makes a difference:
- What the surface is made of and the state it’s in
- The height and pitch, where the work is above ground
- The area to be worked on
- The method, from hand removal to soft wash or steam
We do not list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we’ll talk you through it.
Asking for a quote
When you get in touch, it’s useful to have:
- The postcode and the kind of building
- Whether the building is listed
- Problems you’ve spotted, like loose tiles or water spilling from gutters
- Any past cleaning, coating or repairs you know about
Getting a quote doesn’t take long. Tell us about the job, add a few photos if you can, and we will give you a fixed price. Where we need a closer look, we arrange a time to come round.
How a job runs
Before we leave, you’re welcome to walk round with us. We point out anything we spotted along the way, like a cracked tile or a gutter that isn’t running. On site, the work takes part of a day for most homes, longer where there are several storeys or extensions. We cover or move what’s below before any work starts.
- We look at the walls from your pictures or in person.
- You get a fixed price and the method is agreed.
- We set up ladders or a tower and protect what’s below.
- We brush the worst growth where the render can take it, then treat it.
- Run-off is managed and the area left as we found it.
Preparing for the work
- Leave side gates unlocked so we can reach the back
- Let us know about anything fragile below, like a glass roof
- Tell us about parking restrictions near the property
How to get a quote
The quickest way to a quote is often a few pictures: the whole area, the worst patches and the way in. There’s no need to climb anything; the garden or an upstairs window is fine.
Related advice
Landlords, letting agents and property managers
Between tenancies is often a good time for outside work, when access is simple. Let us know the window you’re working to and we will try to fit around it.
Outside maintenance is easy to forget on a rental. Tenants don’t often check the roof or gutters, so planned work helps catch moss, blockages or slipped tiles before they grow into a bigger job.
Hill Brow questions
I live in a conservation area in Hill Brow: does that affect render cleaning?
For cleaning, gentle methods are the key; anything that changes the wall’s appearance is one to check with Chichester council. The nearest to Hill Brow is the Liss conservation area, some 0.9 miles north-west of the middle of Hill Brow.
Where will your van park in Hill Brow?
The closer the van can be to the house, the better. Streets near Liss station, roughly 1.1 miles north-west of Hill Brow, can be busy with commuter parking, so tell us about your drive or the nearest space when you book.
Would a pressure washer do the job?
On render, high pressure does more harm than good. A soft wash biocide is gentler and keeps working after we leave, so that’s what we recommend.
Do I need to tell my neighbours?
Next door gets the same care as your property. We control splashes, debris and run-off, and if we need to reach the work from their side, we will ask you to check with them first.
Are the products you use a risk to pets and plants?
Pets and plants are something we always plan for. Where a biocide is used, it’s one approved or authorised for this use in Great Britain, applied as the label says, and plants below are protected. Please keep pets indoors on the day.
Why does the render take time to look fully clean?
Some growth dies straight away but its staining takes longer to go. The weather does the rest over the following weeks as we’ll have told you on the day.
Is soft washing safe for painted render?
A soft wash is gentle on painted, through-coloured and older renders, which is why we use it. We check the wall first and tell you about any weak spots.
What do I need to do before you arrive?
The main thing is clear access: cars off the drive, side gates open and pots or furniture out of the way. Close windows and roof lights near the work and keep pets indoors.
Between visits
Nothing outdoors stays clean for ever, but care slows the build-up. Our tips:
- Get cracked render looked at
- Give the walls space by cutting back plants
- Avoid using a pressure washer on rendered walls
- Do not pile soil or bark against the walls
Painting soon after a clean? Let the walls dry out properly first. Check the paint maker’s advice on surface preparation and the clean gives them a sound base.
Give the render room to breathe by cutting back plants that touch it. A wall that dries quickly grows less, and growth returns more slowly.
Render cleaning in Hill Brow: the local picture
The South Downs National Park is within about 4 miles of Hill Brow. Damp air and tree cover around the South Downs can keep walls wet, and algae on render follows. Hill Brow lies roughly 47 miles from central London, comfortably inside the patch we cover. We have 20 years’ experience and are fully insured.
If you live near Liss station, 1.1 miles north-west of Hill Brow, on-street parking may be busy in the day, and our van needs to be fairly close to the house, so let us know the options. If your home backs onto green space such as Liss Riverside Railway Walk South, 1.1 miles north-west of Hill Brow, you are likely to see more shade, leaves and bird droppings. A wall that gets little sun is usually where green growth starts on render.
Hill Brow is about 3 miles north-east of Petersfield, in Hampshire. From the centre of Hill Brow to the outskirts, render cleaning is available for all kinds of property, from a terrace to a large detached house. Our Hampshire coverage runs to 683 places, Hill Brow among them. We also work in Guildford, around 20 miles away.
We work across GU33 for render cleaning and the streets around it. We cover properties on London Road, Plantation Road and Malvern Road and nearby roads. Hill Brow sits on or near the B2070, which makes travel easy for the job. We also cover the places around Hill Brow: Durford Wood (1 mile west), Liss (1 mile north-west), West Liss (1 mile north-west), Rake (1 mile north-east) and The Mint (1 mile north). We also work in nearby towns such as Havant (13 miles south), Horndean (10 miles south-west), Alton (9 miles north-west), Waterlooville (12 miles south-west), Petersfield (3 miles south-west) and Purbrook (13 miles south-west).
Near you in Hill Brow
Roofs on the roads around Whistle Stop pub are all within our usual area. Hill Brow’s nearest station is Liss station, roughly 1.1 miles north-west. Nearby you’ll also find Bear Museum (3.4 miles south-west). For a walk, there’s Liss Riverside Railway Walk South and Wheatham Hill.
What’s safe to do yourself
If you do use a ladder for a quick look, set it on firm, level ground, have someone foot it and never lean out to the side. Don’t climb from the ladder onto the roof, and do not work at height alone.
It’s easy to damage a surface while scraping moss. Lichen grips tightly, so scraping it can damage the tile, which is why it’s normally treated and left to weather away. Leave the roof to someone with the right access.
Different parts, different methods
Sand and cement render
Traditional sand and cement render is often painted, and sometimes left plain. A low-pressure biocide treatment suits it after a check for cracks and hollow patches.
Pebbledash
Where pebbledash has been painted, the paint can lift under pressure. A soft wash biocide is the safest choice for both painted and natural pebbledash.