Kent · Fascia and soffit cleaning
Fascia and Soffit Cleaning in Shelvin
For fascia and soffit cleaning in Shelvin, one call is all it takes: quote, work and clear-up. Checkatrade member and fully insured.
- A tidy roof let down by dirty boards
- White uPVC boards that have turned grey
- Dirty marks where gutters have spilled over
Fascia and soffit cleaning in Shelvin, done properly
uPVC boards are the norm on newer houses. They wear well but show dirt quickly, and white uPVC soon looks grey or green. For homes in Shelvin, a clean of the boards lifts the whole front. The work covers uPVC fascias, bargeboards and porch and bay fascias, and common reasons people get in touch are dirty boards on a porch or garage and cobwebs and dirt under the soffits.
In a village like Shelvin, homes often sit among mature trees, and gutters fill with leaves, twigs and moss. Gutters near trees typically need clearing more often than those on open ground.
It’s worth knowing exactly what a guarantee covers. Ours is a written 12-month workmanship guarantee, and it covers the quality of our work. Nobody can honestly promise that growth or dirt won’t come back outdoors, so we don’t.
- Location
- Shelvin (CT4)
- Region
- Kent
- Cover
- Written 12-month workmanship guarantee
- Quotes
- A fixed price before we start
- Experience
- Two decades in the trade, fully insured
- Telephone
- 01342 344 936
- Page updated
- 30 October 2026

Common problems we fix in Shelvin
Everyday dirt in the air sticks to the boards, and pale uPVC shows it clearly.
Look out for any of the following:
- Painted boards that look dirty and tired
- Dull, grubby uPVC boards
- Black streaks down the front of the gutters
- Soffits on the shaded side darker than the rest
Commuters often leave their cars on the roads around Shepherds Well station, roughly 1.9 miles east of Shelvin, and our van needs to be fairly close to the house, so let us know the options.
What to look for in a quote
- Whether the waste is taken away
- How they’ll keep drains, plants and paths protected
- Whether extra work needs your agreement
- What insurance they carry
Your questions about fascia and soffit cleaning in Shelvin
Is Shelvin close to the Kent Downs?
Shelvin is within about 4 miles of the Kent Downs National Landscape. Hedges and woods near rural homes send plenty of leaves into gutters each autumn.
Where will your van park in Shelvin?
A space on the drive or close by makes the job easier. If you live near Shepherds Well station, roughly 1.9 miles east of Shelvin, street parking can fill up in the day, so let us know the options.
What about my pets and plants?
Not every job uses chemicals: solar panels, for example, are cleaned with soft brushes and clean water. Where a biocide is part of the job, it’s one approved or authorised for this use in Great Britain, applied as the label says. We will tell you about keeping pets and children away.
My home is listed. Can you help?
Yes. Older and listed buildings get the gentlest approach, like hand brushing and low-pressure steam where suitable. A coating, or anything else that changes the look, needs a word with the council first, because listed building consent can be needed for works affecting its special character.
Do I need to be there on the day?
That’s something we agree when we book. What matters is that we can reach everything we need, such as the garden, the side passage and the work area, plus cars moved off the drive and pets indoors.
Do you have insurance?
Yes. Full insurance covers our work, and each job also comes with a written 12-month workmanship guarantee.
Which method will you use?
We look at the job first, then choose. Speed never decides it: we pick whatever does the job with the least risk to your property, and we’ll talk you through it.
How much does fascia and soffit cleaning cost in Shelvin?
The cost depends on the size of the job, the access, the condition of the surface and the method. Call for a fixed quote and we’ll explain what’s included.
Shelvin gutters: what to know
Shelvin has about 23 areas of ancient woodland within two miles, the closest being Fish Pool Wood, about 0.3 miles north of Shelvin. Close to woodland, gutters often need clearing more than once a year. Central London is about 59 miles away, and Shelvin is firmly within our fascia and soffit cleaning area. Our 20 years’ experience and full insurance stand behind each job. Among the historic houses near Shelvin is Acrise Place, about 4 miles south-west of Shelvin. Old buildings like that show why clear gutters and running downpipes matter.
Older homes, like many near churches such as Church of St Martin, can have metal gutters that need gentle clearing.
Shelvin is about 6 miles north-west of Dover, in Kent. We carry out fascia and soffit cleaning for homeowners, landlords and letting agents in Shelvin and the rest of Kent. Across Kent, we cover 922 places, and Shelvin is one of them. There’s also a page for Maidstone, roughly 29 miles from Shelvin.
Fascia and soffit cleaning in CT4 follows the same fixed quote, careful work and written 12-month workmanship guarantee as everywhere else we cover. Streets in the area include Clints Lane and Shelvin Lane, all of which we cover for fascia and soffit cleaning. If your home is just outside Shelvin, we cover Wootton (1 mile south-west), Denton (1 mile west), Lodge Lees (1 mile west), Breach (2 miles west) and Selsted (2 miles south). Within a short drive, we also cover Ashford (14 miles west), Canterbury (8 miles north-west), Dover (6 miles south-east), Folkestone (7 miles south), Ramsgate (14 miles north-east) and Whitstable (13 miles north-west).
Local landmarks in Shelvin
Around Shelvin, homes near Coach House Hotel are covered too, along with the rest of Shelvin. The closest station to Shelvin is Shepherds Well station, about 1.9 miles east of the centre.
Let and managed properties
If you look after several properties, we can quote for them together. Every address is priced on its own job, so the figures are easy to follow.
Landlords, letting agents and property managers book us as well as homeowners. Where the property is let, access can be arranged with the tenant or through the agent, as suits you.
Keeping it in good shape
To keep things in good shape between visits:
- Remember that nesting birds are protected by law
- Leave boards at height to people with proper access
- Look along the eaves for soft or rotten timber
- Cut back growth touching the boards
When we finish, the fascias, soffits and gutter fronts are clean and rinsed. We clear up below and take our waste away.
Clear gutters are the best protection for the boards, and water will not run down the front.
How the job changes from site to site
Bargeboards
Bargeboards are often higher than the fascias, so we plan access accordingly. The same soft brushes and gentle wash are used.
uPVC fascias and soffits
uPVC is the most common material for fascias and soffits today. It cleans up well with soft brushes and a gentle wash, without abrasive pads or harsh pressure.
How a job runs
There are three stages on the day: setting up, the work itself and the clear-up. Getting ready means protecting the area and setting up access, while clearing up means bagging the waste and taking it away. Most of the time goes on the work, which takes anything from a couple of hours on a bungalow to a full day on a large house. Tell us if anything blocks access to the work, from a gate to a parked car.
- We start by looking at the fascias and soffits and agreeing the work.
- Safe access goes up and everything below is covered.
- We brush away webs and loose grime along every run.
- We wash the fascias, soffits and gutter fronts with a gentle method that suits them.
- Everything is rinsed, the run-off is controlled and we clear up.
Helping the day go smoothly
- Check with neighbours if we need to use a shared drive
- Let us know about earlier repairs or treatments
- Let us know about anything fragile below, like a glass roof
Your fixed quote
For a fixed quote, use the form on our contact page, or give us a call on 01342 344 936 and tell us roughly what needs doing and where. A few pictures taken from the ground help a lot, but do not worry if you cannot take any.
Related advice
Why act early in Shelvin
If the gutters keep overflowing, clean boards will not stay clean. Clearing the gutters at the same time deals with both. Shade keeps surfaces damp, so homes near trees benefit most from regular cleaning.
Some things add to the work. A conservatory or extension below, a lot of moss, fragile tiles or no side access all mean extra care, and that’s reflected in the quote. The price is still fixed before any work starts.
What you get with us
- Careful control of run-off
- A Checkatrade member
- The waste bagged and taken away
- Only biocides authorised for the job in Great Britain, applied as the label says
What’s safe to do yourself
Cleaning solar panels yourself is rarely worth the risk. Follow the panel maker’s care guidance, and pressure washers and strong chemicals are best avoided. Since most panels are on a roof, the risk is the same as any roof work.
You can buy moss and algae treatments yourself, but only use one authorised for that job and follow the label to the letter. Applying it to a roof still means working at height, and it must be kept away from drains and ponds.